Minimum degree of ingress protection for non-sparking plugs & sockets.
Determination of faults This document slightly modifies ExTAG DS 2014/003 to address changes introduced during the revision and publication of IEC 60079-11 Ed 6.0. .ExTAG DS 2014/003 has been withdrawn.
NOTE: In accordance with Decision 2018/29 (ExMC/1436/DL). The use of ExTAG DS 2015/001A is withdrawn from use for IECEx Certification from 1st January 2020. As from this date no Certificates can be issued based on DS 2015/001A.” Existing CoCs based on DS 2015/001A can remain active and be revised as needed in accordance with DS 2015/001A.
“X” conditions of certification for non-sparking low power equipment.
Specification of RTI.
Treatment of Ex Components covered by Certificates issued to older editions of Standards. (This Decision Sheet has been renumbered from ExTAG DS 2014/007 to ExTAG DS 2014/001. There have been no other changes). Renumbered edition.
Evaluation of stator windings & insulation system. Note: Removed due to ExTAG Decision 2020/26 ExTAG/631/DL
Production control of non-metallic seal material for Sealed devices.
Series of Devices consisting of both “components” and “equipment”.
Recommendation to improve the effectiveness of the determination of explosion pressure.
Search
